My thermal transfer ribbon keeps snapping when I print my labels, how can I fix this? The darkness/temperature may be set to high. If this temperature is required to maintain the print quality (e.g. print quality is poor at lower settings) then you may need to reconsider your current label/ribbon choice. If the ribbon is […]

There are a few reasons why the printer may be printing blank labels: You may have incompatible stock for the printer e.g. thermal transfer labels in a direct thermal only printer. There is no ribbon in the printer when using thermal transfer labels. The software/driver or the printer itself could be running in the wrong […]

Zebra Desktop or Zebra printer without a front LCD panel Download and install Zebra Setup Utilities and use the wizard provided to set up the LAN or WLAN settings. Select “Configure printer connectivity” and follow the wizard.  You will need to have a ZDesigner driver setup and be able to communicate/print to the printer via another […]

Label printer troubleshooting for label printers that have stopped working. There are a few reasons why the printer may be doing this and it’s worth checking the following.

When pressing the feed button on the printer or printing a label the printer: feeds more than one label, continues to feed labels until it errors, prints blank labels or doesn’t feed the correct distance of material (continuous media only).

AM Labels supplied and installed a complete colour labelling system for Just Miniatures. The solution consisted of a VP485 colour label printer, blank glossy labels, a waste stripping system and a bottle labeller.